Clark Masts A Will-Burt Company

Email sales@clarkmasts.com
Telephone +44 (0)1983 563691 / 567090

QT SeriesTelescopic Mast

Lightweight and portable
 

Clark Masts Systems

Lighting Mast Systems

Sectional Masts

Sectional Masts

Masts for Communications

Specialist Guy Winch Systems

Will-Burt Acquires Clark Masts Systems, Limited of England

Mast Accessories > Mounting

3" Mast Wall Mounting Bracket

A compact 2 piece aluminium mounting bracket for use with 3" base tube ST and SQT masts.

View Details

3.5" Mast Wall Mounting Bracket

A compact 2 piece aluminium wall mounting bracket for 3.5" base tube QTX and NT Series masts.

View Details

Drive on mounting

A steel frame with vertical post to support the mast.

View Details

Lower Mounting Bracket

Lower mounting bracket to support the base of the mast, normally mounted onto a vertical surface and secured by bolts to the base of the mast.

View Details

Mark 4 Tripod Stand

Stable and robust, tripod stand for field mounting of QT,ST and NT Series masts up to 15m.

View Details

Mark 6 Tripod Stand

The Mark 6 folding tripod is made from stainless steel and supplied in a natural finish (silver). Very compact when folded up and much lighter than the Mark 4 version. A range of sizes are avaiable for masts up to 15m extended height. It is suitable for QT, ST and NT masts. 

View Details

Mast Mounting Ring

A mounting ring with a single stud fixing available in sizes 2.5", 3" and 3.5" suitable for QT masts, ST and NT Series.

View Details

Mast Upper Mounting Bracket

Used in conjuntion with a lower mounting bracket or mast base.

View Details

Mast Upper Mounting Bracket

The upper mounting bracket provides support to the upper part of the mast.

View Details

Mounting Bracket Adjustable Lower

An adjustable lower mounting bracket for YT Series masts enabling the mast to be made vertical if the vehicle is parked on sloping ground when used in conjunction with upper mounting collar cat no. 13665. 

View Details

Mounting Bracket Adjustable Upper

Adjustable upper mounting bracket for use in conjunction with lower adjustable mounting bracket 13664

View Details

NT Lower Mounting Bracket

Lower mounting bracket supports base of mast

View Details

NT Roof Bearing

NT Series (3.5") Roof bearing 

View Details

NT Upper Mounting Bracket

Upper mounting bracket for mounting mast on a vertical surface, used in conjunction with a lower mounting bracket

View Details

PT Lower Mounting Bracket

PT Series Lower Mounting Bracket

View Details

PT Roof Bearing

The PT Roof Bearing provides a rotatable weatherproof bearing where the mast passes through the vehicle roof and is used to support internally mounted masts whether turnable or non turning.

View Details

PT Series Saddle Clamp

Quick Release Saddle Clamp for temporary mast mounting

View Details

PT Upper Mounting Bracket

PT Series Upper Mounting bracket for mounting the mast on a vertical surafce.

View Details

Roof Bearing

The roof bearing allows a mast to be mounted though a vehicle or shelter roof providing upper support and a weatherproof seal.

View Details

Saddle Clamp 3"

The 3" saddle clamp is used for temporary or short term mounting of the mast onto a vertical surface. It provides a secure mounting for the mast which can be quickly opened to remove the mast, they are normally used in pairs and other mounting brackets are not required. 

View Details

ST Lower Mounting Bracket

Lower mounting bracket for ST (3") masts 

View Details

ST Roof Bearing

Roof bearing for internal mast mounting

View Details

ST Upper Mounting Bracket

Upper Mounting Bracket for ST (3") masts

View Details

TM Lower Mounting Bracket

A strong welded steel lower support bracket for the base of the mast

View Details

TM Roof Bearing

The roof bearing provides a weather proof seal and upper support for the mast when mounted through the roof of a vehicle or shelter.

View Details

TM Saddle Clamp

An aluminium quick release saddle clamp for mounting of TM 9" Series masts

View Details

TM Upper Mounting Bracket

A strong welded upper mast mounting bracket for the TM Series

View Details

Tripod Leg 36"

An extra long (36") leg for the Mk 4 Tripod allowing mounting on steeper slopes

View Details

Wheel Assembly Mk 6

A transit wheel assembly to fit the Mark 6 tripod to allow easy movement of the collapsed tripod.

View Details

WT Mounting Bracket Lower

Supports the base of the mast when fitted to a vertical surface.

View Details

WT Mounting Bracket Upper

Used to mount the mast onto a vertical surface in conjunction with the lower mounting bracket 

View Details

WT Roof Bearing

Used to provide a rotatable weatherproof bearing where the mast passes through the vehicle roof. It also supports the mast when used in conjunction with a lower mounting bracket.

View Details

WT Saddle Clamp

Normally used in pairs for when the mast needs to be quickly attached or removed to the vehicle or shelter. It is made from cast aluminium and specially designed to hold safely and securely yet prevent damage to the mast base tube.

View Details

XT Mounting Bracket Lower

Mounting Bracket Lower XT

View Details

XT Mounting Bracket Upper

Mounting Bracket XT Upper

View Details

XT Roof Bearing

A roof bearing allows the mast to be mounted internally and the roof bearing supports the mast and provides a weatherproof interface through the vehicle/shelter roof. 

View Details

XT Series Saddle Clamp

XT Series Saddle Clamp for temporary or quick release mounting of a mast, normally used in pairs.

View Details

YT Roof Bearing

A roof bearing for YT Series masts which provides upper support for the mast and a weatherproof seal.

View Details

YT Saddle Clamp

A 5" diameter quick release saddle clamp made from cast aluminium designed to securely hold the mast when frequent removal is required. 

View Details