An anti climb collar is available for most masts, made from steel and fitted with a rotating collar.
Negates torsional movement on the mast head when in the retracted position.
Designed to be fitted to a base tube to channel away water collected inside the mast from condensation etc
A 24mm spigot adapter to fit the standard camera thread (1/4"Whitworth) which allows rapid mounting of equipment and cameras to a Clark mast.
A composite plastic material pad to allow legs on trailers to be used on hard surfaces.
On masts fitted with Combined Collar (Locking collar) masts, the standard handles can be replaced with domed hexagon nuts for extra security. A hexagon key tool is required for operation.
A steel equipment box fitted to the trailer chassis, storage of mast accessories and ancilliary equipment Additional boxes may be ordered with trailers subject to weight.
A heavy duty nylon canvas cover to protect the guy winch controller and guy ropes when not in use.
Heavy duty nylon canvas head cover, protects the mast head when mast retracted, available to suit all sizes of mast. Standard colour black or miltary green on request. Material is a heavy duty nylon canvas type material with plastic fittings.
An additional section which can add 1m extra height to most masts with a standard 24mm top socket, fitted with a guy collar.
A factory fitted internal switch to alert the operator that the mast is not fully retracted.
A folding tripod stand with spiked feet and adjustable legs, to allow attachment of head loads at a safe convenient height.
This side handle clamps to the mast to provide a turning handle on a rotatable mast.
A container of solid silicone grease the ONLY recommended for lubrication of Clark telescopic mast sections.
© Copyright CLARK MASTS LIMITED 2023. All rights reserved.
Clark Masts is a division of Clark Masts Systems Ltd.
Company No. 01419385