Mast Accessories > Air supply

A combined unit consisting of a pressure gauge, air pressure regulator and control handle for providing a regulated air supply from the vehicle air system to the mast and to provide up and down control for mast extension.

View Details

We have a wide range of air supply equipment, please see our pdf data sheet by clicking on the View Details below to view

View Details

The bayonet plug fits the bayonet socket to provide a quick and secure method of attaching and detaching an air supply hose to the mast base.

View Details

Bayonet socket assembly for quick connection and disconnection of an air supply to the mast base.

View Details

Rotary air control valve to control mast extension and retraction when used in conjunction with a regulated air compressor.

View Details

Enables 2 masts to be supplied from a single air supply

View Details

A rotary air control valve to raise or lower the mast when connected to an air reservoir via an air pressure regulator (Cat no 16991)

View Details

A twin cylinder footpump complete with 3m of air hose and bayonet connector.

View Details

Hand pump for use with all Clark Masts, supplied with integral stand and 3m of air hose and bayonet connector.

View Details

This kit contains all you need to connect your mast to the air compressor, comprising 3m of rubber air hose, male bayonet connector, female bayonet socket for the mast with seals and hose clips.

View Details

Model 185 Powerpacks are suitable for larger masts from WT to TM. Powered either by vehicle electrics 12 or 24v DC or by mains power 110 or 230v AC and operated by a remote control lead 2.5m long. A built in pressure switch cuts out when the mast reaches its preset level and cuts in only when required to top up the pressure thereby saving battery power. Supplied with power connection plug.

View Details

Model 40 Powerpacks are suitable for masts from ST to YT. Powered by vehicle electrics either 12 or 24v DC normally operated using a remote control lead 2.5m long. A built in pressure switch cuts out when the mast reaches its preset level and cuts in only when required to top up the pressure thereby saving battery power. Supplied with power connection plug.

View Details

Model 40E Powerpacks are similar to the Model 40 and are suitable for masts from ST to YT Series but are operated by a switch directly on the facia of the unit and cannot be used with a remote control lead. Powered by vehicle electrics they have a built in pressure switch which cuts out when the preset level is reached and cut in only when required to top up air pressure thereby saving battery power.

View Details

A compact air pressure regulator to provide low pressure air for mast extension when used in conjunction with the vehicle air system and AB Control Valve.

View Details

Remote Control for use with Powerpacks

View Details

An integral handpump for ST Series masts fixed to the mast using a twin clamp

View Details