Email sales@clarkmasts.com
Telephone +44 (0)1983 563691 / 567090
The QT Range of lightweight telescopic pneumatic masts are designed to be portable and erected quickly where they are required. Available in a wide range of heights from 3m to 15m and in a range of sizes to suit varying headloads. It is a highly versatile system capable of being field mounted using a folding tripod stand or field guy set. Equally at home when mounted to a vehicle or shelter, the QT Range is designed to be versatile. Made from high strength 16 swg aluminium tube,to save weight, the QT Range is non keyed and each section is fitted with a locking collar.Headloads are quickly attached using the quick clamp 24mm socket.
The four variants are the QTL which has a 2" diameter base tube, the QT which has a 2.5" diameter base tube, the SQT which has a 3" diameter base tube and the QTX which has a 3.5" base tube, there is also a turnable version with a rotatable locking collar called QTX-R. QTL masts are available up to 6m, QT masts are available up to 10m extended height, SQT masts up to 15m height and the QTX masts are up to 15m extended height.
Consideration to the retracted height of any mast must be given when choosing the model you require and sometimes compromise needs to be made for ease of transport, length of vehicle and manual handling. Please speak to our sales team for expert advice.
3" Mast Wall Mounting Bracket - 9920
A compact 2 piece aluminium mounting bracket for use with 3" base tube ST and SQT masts.
3.5" Mast Wall Mounting Bracket - 25962
A compact 2 piece aluminium wall mounting bracket for 3.5" base tube QTX and NT Series masts.
Antenna Adapters
We have a wide range of antenna adapters, please see our pdf data sheet by clicking on the View Details below to view
Camera Adapter - 29442
A 24mm spigot adapter to fit the standard camera thread (1/4"Whitworth) which allows rapid mounting of equipment and cameras to a Clark mast.
Height Extender 1m - 6974
An additional section which can add 1m extra height to most masts with a standard 24mm top socket, fitted with a guy collar.
Mark 4 Tripod Stand - 9427
Stable and robust, tripod stand for field mounting of QT,ST and NT Series masts up to 15m.
Mark 6 Tripod Stand
The Mark 6 folding tripod is made from stainless steel and supplied in a natural finish (silver). Very compact when folded up and much lighter than the Mark 4 version. A range of sizes are avaiable for masts up to 15m extended height. It is suitable for QT, ST and NT masts.
Mast Mounting Ring
A mounting ring with a single stud fixing available in sizes 2.5", 3" and 3.5" suitable for QT masts, ST and NT Series.
Saddle Clamp 3" - 2433
The 3" saddle clamp is used for temporary or short term mounting of the mast onto a vertical surface. It provides a secure mounting for the mast which can be quickly opened to remove the mast, they are normally used in pairs and other mounting brackets are not required.
Tubular Antenna Adapter
A universal adapter to allow mounting of equipment to a mast with a 24mm top socket using U bolt type clamps.
Universal Antenna Mounting Large - 8999
A universal antenna mounting bracket with a 24mm spigot designed to fit all masts fitted with a 24mm top socket.
Can't find what you're looking for? Call +44 (0)1983 563691 or email us at sales@clarkmasts.com - our sales team are ready to help!
Click thumbnails to see full size photo.
© Copyright The Will-Burt Company (EU) Limited 2024. All rights reserved.
Clark Masts is a trading name of The Will-Burt Company (EU) Limited registered in England and Wales
Company No. 06333279
Registered office:
3000A Parkway
Whiteley
Hampshire PO15 7FX
United Kingdom