Clark Masts ZT Series range of heavy duty pneumatic telescopic masts have a base tube diameter of 7 inches. ZT masts offer a very wide range of models and headload ranges up to 220kg and extended heights from 2m to 34m. The ideal heavy duty telescoping communications mast. Masts can be vehicle mounted, field mounted and for maximum extended heights mounted using our roof trolley system. ZT masts are also available on our 803 Series Trailer Masts.
Each telescoping mast section is keyed to prevent relative rotation to the next tube allowing the complete mast to be rotated from the ground with ease if directional headloads are being deployed. ZT masts can be specified with locking or non locking (plain) collars depending on the type of application and with rotating or non rotating bases.
Bearing surfaces are fitted with nylon and PTFE to guarantee smooth and effortless extension and retraction in the most demanding climatic conditions. ZT masts have been tested to MIL STD 810F. When each section is fully extended an automatic collet locking system provides complete rigidity when the mast is fully extended. Double Supertork is fitted as standard giving torsional stability of +/- 1.5 degrees. For enhanced torsional stability, our bespoke Triple Supertork System gives down to 0.1 degrees of stability, dependant upon mast model/size.
Accessories can be painted to match mast.
Hand Pump - 41157
Hand pump for use with all Clark Masts, supplied with integral stand and 3m of air hose and bayonet connector.
Internal Extension Warning Switch
A factory fitted internal switch to alert the operator that the mast is not fully retracted.
Lower Mounting Bracket
Lower mounting bracket to support the base of the mast, normally mounted onto a vertical surface and secured by bolts to the base of the mast.
Mast Upper Mounting Bracket
The upper mounting bracket provides support to the upper part of the mast.
Model 185 Powerpack
Model 185 Powerpacks are suitable for larger masts from WT to TM. Powered either by vehicle electrics 12 or 24v DC or by mains power 110 or 230v AC and operated by a remote control lead 2.5m long. A built in pressure switch cuts out when the mast reaches its preset level and cuts in only when required to top up the pressure thereby saving battery power. Supplied with power connection plug.
Remote Control for use with Powerpacks
The roof bearing allows a mast to be mounted though a vehicle or shelter roof providing upper support and a weatherproof seal.
Can't find what you're looking for? Call +44 (0)1983 563691 or email us at firstname.lastname@example.org - our sales team are ready to help!
© Copyright CLARK MASTS LIMITED 2022. All rights reserved.
Clark Masts is a division of Clark Masts Systems Ltd.
Company No. 01419385