MT Series Telescopic Masts are made from 4" diameter aircraft grade aluminium alloy base tube. Shown below erected using a lower field guy set instead of field legs. The MT mast range features keyed sections to prevent rotation. Made from high strength 3.25mm wall aircraft grade aluminium alloy with a choice of either non turnable or turnable versions. Plain collars or clamped (locking) collars are available.
Hand Pump - 41157
Hand pump for use with all Clark Masts, supplied with integral stand and 3m of air hose and bayonet connector.
Model 40 Powerpack
Model 40 Powerpacks are suitable for masts from ST to YT. Powered by vehicle electrics either 12 or 24v DC normally operated using a remote control lead 2.5m long. A built in pressure switch cuts out when the mast reaches its preset level and cuts in only when required to top up the pressure thereby saving battery power. Supplied with power connection plug.
Model 40E Powerpack
Model 40E Powerpacks are similar to the Model 40 and are suitable for masts from ST to YT Series but are operated by a switch directly on the facia of the unit and cannot be used with a remote control lead. Powered by vehicle electrics they have a built in pressure switch which cuts out when the preset level is reached and cut in only when required to top up air pressure thereby saving battery power.
Remote Control for use with Powerpacks
Top Guy Kit 4 way
A typical 4 way guying kit for top guy only, consisting of 4 x steel ground pickets, 4 guy rope assemblies, hammer and storage bag.
Top Mid and Lower Field Guy Kit 4 way
A tyoical 4 way guying kit for top, middle and lower height guys consisting of 12 steel ground pickets, 12 guy rope assmblies (4 top, 4 middle and 4 lower) hammer and storage bags.
© Copyright The Will-Burt Company (EU) Limited 2024. All rights reserved.
Clark Masts is a trading name of The Will-Burt Company (EU) Limited registered in England and Wales
Company No. 06333279
Hampshire PO15 7FX