Clark Masts

Email sales@clarkmasts.com
Telephone +44 (0)1983 563691 / 567090

QT SeriesTelescopic Mast

Lightweight and portable
 

Specialist Guy Winch Systems

Clark Masts Systems

Lighting Mast Systems

Masts for Communications

Sectional Masts

Sectional Masts

Telescopic Masts

Clark Masts have a wide range of telescopic pneumatic masts ranging in height from 1.2 metres to over 30 metres extended height, with a range of retracted heights to suit your requirement whether it is for a vehicle or to be field mounted. Taller masts can be mounted to vehicles using one of our roof trolley systems.

Clark Masts have a wide range of mounting accessories and also a range of fittings allowing you to safely attach your headload to the mast top either permanently or for repid deployment.

Our masts are approved to MIL STD 810F and have been tested and proved in use all over the world in many demading situations.

AX Series

AX mast fitted to Toyota IQ

AX Series telescopic masts are designed for use in vehicles with video cameras, either conventional or thermal imaging. Often they are used in emergency services command vehicles, security vehicles, police crowd control, traffic monitoring or enforcement vehicles.

View Details

DAF

DAF (which stands for Deployable Antenna Field) Series are based on ST and NT Series masts fitted with integral field legs. They are fitted with an integral hand pump for extension and have four telescopic adjustable steel field legs for mounting. The masts are made from high strength 3.25mm wall anodised aluminium tube with a full length keyway machined into each telescopic section.

View Details

FT Series

The FT Series of masts are telescopic field masts based on the QT Series of masts which are fitted with integral field legs for rapid deployment. 

View Details

MT Series

MT Series mast erected using lower field guy set

MT Series Telescopic Masts are made from 4" diameter aircraft grade aluminium alloy base tube and is shown here erected using a lower field guy set instead of field legs. The MT mast range features keyed sections to prevent rotation. Made from high strength 3.25mm wall aircraft grade aluminium alloy with a choice of either non turnable or turnable versions. Plain collars or clamped (locking) collars are available. 

View Details

NT Series

NT40-4-NC shown on Mk 4 Tripod

The NT Series of masts are part of the Clark Masts telescopic mast range featuring keyed sections to prevent rotation. Made from 3.5" diameter, high strength 3.25mm wall aircraft grade aluminium alloy with a choice of either non turnable or turnable versions. Plain collars or clamped (locking) collars are available. 

View Details

PT Series

PT Series masts are medium duty telescopic pneumatic masts for use as communications masts, cctv masts, antenna masts, radio antenna masts, microwave antenna masts, camera masts and more. 

View Details

QT Series

SQT10-6/HP Mast on Mark 6 Tripod

A lightweight portable telescopic mast system available in a range of heights and headloads from 3 metres to 15metres, available in a variety of mountings, field mounted, wall or bulkhead mounted , vehicle mounted.

View Details

ST Series

ST65 Mast

The ST Series of masts are the start of the Clark Masts telescopic mast range featuring keyed sections to prevent rotation. Made from high strength 3" diameter 3.25mm wall aircraft grade aluminium alloy with a choice of either non turnable or turnable versions. Plain collars or clamped (locking) collars are available. 

View Details

TM Series

TM 150-8 Mast at 15m with 160kg head load

Clark Masts TM Series range of super heavy duty pneumatic telescopic masts have a base tube diameter of 9 inches and a maximum of nine telescopic sections. TM masts offer a very wide range of models and headload ranges up to 500kg and extended heights from 2m to 34m.

View Details

WT Series

WT5.5-5-NC

Clark Masts WT Series range of heavy duty pneumatic telescopic masts have a base tube diameter of six inches and a maximum of nine telescopic sections. WT masts offer a very wide range of models and headload ranges from 15kg to 150kg and extended heights from 2m to 30m. The ideal telescoping communications mast. Masts can be vehicle mounted, field mounted and for maximum extended heights mounted using our roof trolley system.

View Details

XT Series

Prototype military observation trailer with XT Series mast

Clark Masts XT Series range of heavy duty pneumatic telescopic masts have a base tube diameter of 8 inches and a maximum of nine telescopic sections. XT masts offer a very wide range of models and headload ranges up to 400kg and extended heights from 2m to 34m. The ideal telescoping communications mast. Masts can be vehicle mounted, field mounted and for maximum extended heights mounted using our roof trolley system. XT masts are also available on our 804 Series Trailer Masts.

View Details

YT Series

YT Series Mast showing 4 way guying

Clark Masts YT Series of telescopic masts combine large headloads, high extended heights in relation to the retracted length. Ideal for use as mobile communications masts, telecommunications masts and at lower heights offering a competitive alternative to much larger masts. Used with a Clark Masts Roof Trolley system, the YT series can offer extended heights of 21m when fitted to a suitable van or 4x4 vehicle.

View Details

ZT Series

ZT mast fitted internally and used with jack legs for extra stability

Clark Masts ZT Series range of heavy duty pneumatic telescopic masts have a base tube diameter of 7 inches. ZT masts offer a very wide range of models and headload ranges up to 220kg and extended heights from 2m to 34m. The ideal heavy duty telescoping communications mast. Masts can be vehicle mounted, field mounted and for maximum extended heights mounted using our roof trolley system. ZT masts are also available on our 803 Series Trailer Masts.

View Details