Clark Masts

Email sales@clarkmasts.com
Telephone +44 (0)1983 563691 / 567090

Military Masts approved to MIL STD 810F

Military Masts approved to MIL STD 810F

YT Series Military

Clark Masts Military YT Series of telescopic masts combine large headloads, high extended heights in relation to the retracted length. Ideal for use as mobile communications masts, telecommunications masts and at lower heights offering a competitive alternative to much larger masts. Used with a Clark Masts Roof Trolley system, the YT series can offer extended heights of 21m when fitted to a suitable van or 4x4 

Shown above mounted using a lower field guy set, the mast is guyed at three levels using coloured guy ropes for indentification. YT Series masts can also be mounted using the field leg set as well as on a vehicle of shelter using mounting brackets.

Accessories

Accessories can be supplied in matching military paint colours

24" Picket - 2484

Heavy duty angled steel ground picket for anchorage of guy ropes with attachment points for multiple guy ropes.

View details

Domed Locking Nuts

On masts fitted with Combined Collar (Locking collar) masts, the standard handles can be replaced with domed hexagon nuts for extra security. A hexagon key tool is required for operation.

View details

Internal Extension Warning Switch

A factory fitted internal switch to alert the operator that the mast is not fully retracted.

View details

Lower Mounting Bracket

Lower mounting bracket to support the base of the mast, normally mounted onto a vertical surface and secured by bolts to the base of the mast.

View details

Mast Air Connection Kit - 30090

This kit contains all you need to connect your mast to the air compressor, comprising 3m of rubber air hose, male bayonet connector, female bayonet socket for the mast with seals and hose clips.

View details

Mast Upper Mounting Bracket

The upper mounting bracket provides support to the upper part of the mast.

View details

Model 185 Powerpack

Model 185 Powerpacks are suitable for larger masts from WT to TM. Powered either by vehicle electrics 12 or 24v DC or by mains power 110 or 230v AC and operated by a remote control lead 2.5m long. A built in pressure switch cuts out when the mast reaches its preset level and cuts in only when required to top up the pressure thereby saving battery power. Supplied with power connection plug.

View details

Model 40 Powerpack

Model 40 Powerpacks are suitable for masts from ST to YT. Powered by vehicle electrics either 12 or 24v DC normally operated using a remote control lead 2.5m long. A built in pressure switch cuts out when the mast reaches its preset level and cuts in only when required to top up the pressure thereby saving battery power. Supplied with power connection plug.

View details

Model 40E Powerpack

Model 40E Powerpacks are similar to the Model 40 and are suitable for masts from ST to YT Series but are operated by a switch directly on the facia of the unit and cannot be used with a remote control lead. Powered by vehicle electrics they have a built in pressure switch which cuts out when the preset level is reached and cut in only when required to top up air pressure thereby saving battery power.

View details

Remote Control

Remote Control for use with Powerpacks

View details

SCAM Handpump

SCAM Handpump for use with all Clark Masts, supplied with integral stand and 3m of air hose and bayonet connector.

View details

Top Guy Kit 4 way

A typical 4 way guying kit for top guy only, consisting of 4 x steel ground pickets, 4 guy rope assemblies, hammer and storage bag.

View details

Top Mid and Lower Field Guy Kit 4 way

A tyoical 4 way guying kit for top, middle and lower height guys consisting of 12 steel ground pickets, 12 guy rope assmblies (4 top, 4 middle and 4 lower) hammer and storage bags.

View details

YT Roof Bearing

A roof bearing for YT Series masts which provides upper support for the mast and a weatherproof seal.

View details

YT Saddle Clamp - 29110

A 5" diameter quick release saddle clamp made from cast aluminium designed to securely hold the mast when frequent removal is required. 

View details

Technical Data

  • MIL STD 810F
  • Headloads up to 100kg
  • Vehicle, shelter, field mounting or roof trolley mounting options

Can't find what you're looking for? Call +44 (0)1983 563691 or email us at sales@clarkmasts.com - our sales team are ready to help!

Photo Gallery