Clark Masts

Email sales@clarkmasts.com
Telephone +44 (0)1983 563691 / 567090

Headloads up to 160kg

WT Series Military

Clark Masts WT Series range of heavy duty pneumatic telescopic masts have a base tube diameter of six inches and a maximum of nine telescopic sections. WT masts offer a very wide range of models and headload ranges from 15kg to 160kg and extended heights from 2m to 34m. The ideal telescoping communications mast. Masts can be vehicle mounted, field mounted and for maximum extended heights mounted using our roof trolley system.

Each telescoping mast section is keyed to prevent relative rotation to the next tube allowing the complete mast to be rotated from the ground with ease if directional headloads are being deployed.   WT masts can be specified with locking or non locking (plain) collars depending on the type of application and with rotating or non rotating bases.

Bearing surfaces are fitted with nylon and PTFE to guarantee smooth and effortless extension and retraction in the most demanding climatic conditions.WT masts have been tested to MIL STD 810F. When each section is fully extended an automatic collet locking system provides complete rigidity when the mast is fully extended. Double Supertork is fitted as standard giving torsional stability of +/- 1.5 degrees. For enhanced torsional stability, our bespoke Triple Supertork System gives down to 0.1 degrees of stability, dependant upon mast model/size.

Accessories

Accessories can be supplied painted in matching military paint colours.

Internal Extension Warning Switch

A factory fitted internal switch to alert the operator that the mast is not fully retracted.

View details

Model 185 Powerpack

Model 185 Powerpacks are suitable for larger masts from WT to TM. Powered either by vehicle electrics 12 or 24v DC or by mains power 110 or 230v AC and operated by a remote control lead 2.5m long. A built in pressure switch cuts out when the mast reaches its preset level and cuts in only when required to top up the pressure thereby saving battery power. Supplied with power connection plug.

View details

Remote Control

Remote Control for use with Powerpacks

View details

SCAM Handpump

SCAM Handpump for use with all Clark Masts, supplied with integral stand and 3m of air hose and bayonet connector.

View details

WT Mounting Bracket Lower - 14253

Supports the base of the mast when fitted to a vertical surface.

View details

WT Mounting Bracket Upper - 14252

Used to mount the mast onto a vertical surface in conjunction with the lower mounting bracket 

View details

WT Roof Bearing - 14265

Used to provide a rotatable weatherproof bearing where the mast passes through the vehicle roof. It also supports the mast when used in conjunction with a lower mounting bracket.

View details

WT Saddle Clamp - 1987

Normally used in pairs for when the mast needs to be quickly attached or removed to the vehicle or shelter. It is made from cast aluminium and specially designed to hold safely and securely yet prevent damage to the mast base tube.

View details

Technical Data

  • MIL STD 810F
  • Operating temp range -40 C to +55 C
  • CARC paint finish available

Can't find what you're looking for? Call +44 (0)1983 563691 or email us at sales@clarkmasts.com - our sales team are ready to help!

Related Products